Manage Cluster Daemons

• 1: Perform a Rolling Update on a DaemonSet
• 2: Perform a Rollback on a DaemonSet

1 - Perform a Rolling Update on a DaemonSet

This page shows how to perform a rolling update on a DaemonSet.

Before you begin

• The DaemonSet rolling update feature is only supported in Kubernetes version 1.6 or later.

DaemonSet Update Strategy

DaemonSet has two update strategy types:

• OnDelete: With OnDelete update strategy, after you update a DaemonSet template, new DaemonSet pods will only be created when you manually delete old DaemonSet pods. This is the same behavior of DaemonSet in Kubernetes version 1.5 or before.
• RollingUpdate: This is the default update strategy.
  With RollingUpdate update strategy, after you update a DaemonSet template, old DaemonSet pods will be killed, and new DaemonSet pods will be created automatically, in a controlled fashion. At most one pod of the DaemonSet will be running on each node during the whole update process.

Performing a Rolling Update

To enable the rolling update feature of a DaemonSet, you must set its .spec.updateStrategy.type to RollingUpdate.

You may want to set .spec.updateStrategy.rollingUpdate.maxUnavailable (default to 1) and .spec.minReadySeconds (default to 0) as well.

Creating a DaemonSet with RollingUpdate update strategy

This YAML file specifies a DaemonSet with an update strategy as 'RollingUpdate'

controllers/fluentd-daemonset.yaml

apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: fluentd-elasticsearch
  namespace: kube-system
  labels:
    k8s-app: fluentd-logging
spec:
  selector:
    matchLabels:
      name: fluentd-elasticsearch
  updateStrategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  template:
    metadata:
      labels:
        name: fluentd-elasticsearch
    spec:
      tolerations:
      # this toleration is to have the daemonset runnable on master nodes
      # remove it if your masters can't run pods
      - key: node-role.kubernetes.io/master
        effect: NoSchedule
      containers:
      - name: fluentd-elasticsearch
        image: quay.io/fluentd_elasticsearch/fluentd:v2.5.2
        volumeMounts:
        - name: varlog
          mountPath: /var/log
        - name: varlibdockercontainers
          mountPath: /var/lib/docker/containers
          readOnly: true
      terminationGracePeriodSeconds: 30
      volumes:
      - name: varlog
        hostPath:
          path: /var/log
      - name: varlibdockercontainers
        hostPath:
          path: /var/lib/docker/containers

After verifying the update strategy of the DaemonSet manifest, create the DaemonSet:

kubectl create -f https://k8s.io/examples/controllers/fluentd-daemonset.yaml

Alternatively, use kubectl apply to create the same DaemonSet if you plan to update the DaemonSet with kubectl apply.

kubectl apply -f https://k8s.io/examples/controllers/fluentd-daemonset.yaml

Checking DaemonSet RollingUpdate update strategy

Check the update strategy of your DaemonSet, and make sure it's set to RollingUpdate:

kubectl get ds/fluentd-elasticsearch -o go-template='{{.spec.updateStrategy.type}}{{"\n"}}' -n kube-system

If you haven't created the DaemonSet in the system, check your DaemonSet manifest with the following command instead:

kubectl apply -f https://k8s.io/examples/controllers/fluentd-daemonset.yaml --dry-run=client -o go-template='{{.spec.updateStrategy.type}}{{"\n"}}'

The output from both commands should be:

RollingUpdate

If the output isn't RollingUpdate, go back and modify the DaemonSet object or manifest accordingly.

Updating a DaemonSet template

Any updates to a RollingUpdate DaemonSet .spec.template will trigger a rolling update. Let's update the DaemonSet by applying a new YAML file. This can be done with several different kubectl commands.

controllers/fluentd-daemonset-update.yaml

apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: fluentd-elasticsearch
  namespace: kube-system
  labels:
    k8s-app: fluentd-logging
spec:
  selector:
    matchLabels:
      name: fluentd-elasticsearch
  updateStrategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  template:
    metadata:
      labels:
        name: fluentd-elasticsearch
    spec:
      tolerations:
      # this toleration is to have the daemonset runnable on master nodes
      # remove it if your masters can't run pods
      - key: node-role.kubernetes.io/master
        effect: NoSchedule
      containers:
      - name: fluentd-elasticsearch
        image: quay.io/fluentd_elasticsearch/fluentd:v2.5.2
        resources:
          limits:
            memory: 200Mi
          requests:
            cpu: 100m
            memory: 200Mi
        volumeMounts:
        - name: varlog
          mountPath: /var/log
        - name: varlibdockercontainers
          mountPath: /var/lib/docker/containers
          readOnly: true
      terminationGracePeriodSeconds: 30
      volumes:
      - name: varlog
        hostPath:
          path: /var/log
      - name: varlibdockercontainers
        hostPath:
          path: /var/lib/docker/containers

Declarative commands

If you update DaemonSets using configuration files, use kubectl apply:

kubectl apply -f https://k8s.io/examples/controllers/fluentd-daemonset-update.yaml

Imperative commands

If you update DaemonSets using imperative commands, use kubectl edit :

kubectl edit ds/fluentd-elasticsearch -n kube-system

Updating only the container image

If you only need to update the container image in the DaemonSet template, i.e. .spec.template.spec.containers[*].image, use kubectl set image:

kubectl set image ds/fluentd-elasticsearch fluentd-elasticsearch=quay.io/fluentd_elasticsearch/fluentd:v2.6.0 -n kube-system

Watching the rolling update status

Finally, watch the rollout status of the latest DaemonSet rolling update:

kubectl rollout status ds/fluentd-elasticsearch -n kube-system

When the rollout is complete, the output is similar to this:

daemonset "fluentd-elasticsearch" successfully rolled out

Troubleshooting

DaemonSet rolling update is stuck

Sometimes, a DaemonSet rolling update may be stuck. Here are some possible causes:

Some nodes run out of resources

The rollout is stuck because new DaemonSet pods can't be scheduled on at least one node. This is possible when the node is running out of resources.

When this happens, find the nodes that don't have the DaemonSet pods scheduled on by comparing the output of kubectl get nodes and the output of:

kubectl get pods -l name=fluentd-elasticsearch -o wide -n kube-system

Once you've found those nodes, delete some non-DaemonSet pods from the node to make room for new DaemonSet pods.

Note: This will cause service disruption when deleted pods are not controlled by any controllers or pods are not replicated. This does not respect PodDisruptionBudget either.

Broken rollout

If the recent DaemonSet template update is broken, for example, the container is crash looping, or the container image doesn't exist (often due to a typo), DaemonSet rollout won't progress.

To fix this, update the DaemonSet template again. New rollout won't be blocked by previous unhealthy rollouts.

Clock skew

If .spec.minReadySeconds is specified in the DaemonSet, clock skew between master and nodes will make DaemonSet unable to detect the right rollout progress.

Clean up

Delete DaemonSet from a namespace :

kubectl delete ds fluentd-elasticsearch -n kube-system

What's next

• See Task: Performing a rollback on a DaemonSet
• See Concepts: Creating a DaemonSet to adopt existing DaemonSet pods

2 - Perform a Rollback on a DaemonSet

This page shows how to perform a rollback on a DaemonSet.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

You should already know how to perform a rolling update on a DaemonSet.

Performing a rollback on a DaemonSet

Step 1: Find the DaemonSet revision you want to roll back to

You can skip this step if you only want to roll back to the last revision.

List all revisions of a DaemonSet:

kubectl rollout history daemonset <daemonset-name>

This returns a list of DaemonSet revisions:

daemonsets "<daemonset-name>"
REVISION        CHANGE-CAUSE
1               ...
2               ...
...

• Change cause is copied from DaemonSet annotation kubernetes.io/change-cause to its revisions upon creation. You may specify --record=true in kubectl to record the command executed in the change cause annotation.

To see the details of a specific revision:

kubectl rollout history daemonset <daemonset-name> --revision=1

This returns the details of that revision:

daemonsets "<daemonset-name>" with revision #1
Pod Template:
Labels:       foo=bar
Containers:
app:
 Image:        ...
 Port:         ...
 Environment:  ...
 Mounts:       ...
Volumes:      ...

Step 2: Roll back to a specific revision

# Specify the revision number you get from Step 1 in --to-revision
kubectl rollout undo daemonset <daemonset-name> --to-revision=<revision>

If it succeeds, the command returns:

daemonset "<daemonset-name>" rolled back

Note: If --to-revision flag is not specified, kubectl picks the most recent revision.

Step 3: Watch the progress of the DaemonSet rollback

kubectl rollout undo daemonset tells the server to start rolling back the DaemonSet. The real rollback is done asynchronously inside the cluster control plane.

To watch the progress of the rollback:

kubectl rollout status ds/<daemonset-name>

When the rollback is complete, the output is similar to:

daemonset "<daemonset-name>" successfully rolled out

Understanding DaemonSet revisions

In the previous kubectl rollout history step, you got a list of DaemonSet revisions. Each revision is stored in a resource named ControllerRevision.

To see what is stored in each revision, find the DaemonSet revision raw resources:

kubectl get controllerrevision -l <daemonset-selector-key>=<daemonset-selector-value>

This returns a list of ControllerRevisions:

NAME                               CONTROLLER                     REVISION   AGE
<daemonset-name>-<revision-hash>   DaemonSet/<daemonset-name>     1          1h
<daemonset-name>-<revision-hash>   DaemonSet/<daemonset-name>     2          1h

Each ControllerRevision stores the annotations and template of a DaemonSet revision.

kubectl rollout undo takes a specific ControllerRevision and replaces DaemonSet template with the template stored in the ControllerRevision. kubectl rollout undo is equivalent to updating DaemonSet template to a previous revision through other commands, such as kubectl edit or kubectl apply.

Note: DaemonSet revisions only roll forward. That is to say, after a rollback completes, the revision number (.revision field) of the ControllerRevision being rolled back to will advance. For example, if you have revision 1 and 2 in the system, and roll back from revision 2 to revision 1, the ControllerRevision with .revision: 1 will become .revision: 3.

Troubleshooting

• See troubleshooting DaemonSet rolling update.